SCH-1500 High Precision All-in-One Industrial Chiller
Key Parameters:
- ✅ Precision: ±0.1°C
- ✅ Cooling Capacity: 3560W
- ✅ Application: Laser, CNC, Laboratory
Important Application Tip:
The SCH-1500 is specifically optimized for dual-temperature control, making it ideal for fiber laser systems requiring simultaneous cooling of the laser source and the optics (QBH connector).
Product Introduction
The SCH-1500 All-in-One unit represents the pinnacle of integrated industrial cooling. Designed for environments where space-saving and high performance are paramount, this system combines a powerful compressor with an intelligent control logic to maintain ±0.1°C temperature stability. Whether you are operating in high-humidity regions or intensive industrial zones, the SCH-1500 ensures your equipment stays within the optimal thermal range.
Dual Temperature & Dual Control
The SCH-1500 features an advanced dual-cycle system. This allows for independent temperature management for different components, such as the laser oscillator and the output lens, preventing condensation and maximizing beam stability in fiber laser applications.
Intelligent Protection System
Safety is built into every component. With integrated flow alarms, over-temperature warnings, and compressor overheat protection, the SCH-1500 monitors its own health 24/7. It meets rigorous ISO standards for industrial safety and reliability.
Technical Data (SCH-1500)
| Parameter | Specification (50Hz) | Specification (60Hz) |
|---|---|---|
| Working Voltage | AC 220V 50Hz | AC 220V 60Hz |
| Cooling Capacity | 3560W | 4100W |
| Temperature Stability | ±0.1°C | |
| Max. Power Consumption | 2.35KW | 2.58KW |
| Pump Max. Flow / Lift | 80L/min | ≥30M | |
| Tank Capacity | 16L | |
| Machine Dimensions | 825*455*700mm (L*W*H) | |
Product Features
- High efficiency and environmental protection.
- Dual temperature and dual control mode for diverse industrial needs.
- Multiple alarm functions: Compressor time-delay protection, over-temperature alarm, flow alarm.
- All-in-one integrated design reduces installation footprint.
Ventilation & Installation Distance
To ensure optimal cooling efficiency and longevity of the SCH-1500, please maintain the following clearance:
- Air Inlet: At least 30cm distance from walls or obstacles.
- Air Outlet: At least 50cm distance to allow proper heat dissipation.
Product Working Principle
The SCH-1500 operates on a vapor-compression refrigeration cycle. The refrigerant absorbs heat from the circulating water via the evaporator, cooling the water that flows to your industrial equipment. The heated refrigerant is then compressed and cooled in the condenser. Our unique PID control system modulates the cooling output to maintain a precise temperature within ±0.1°C of the set point.
Frequently Asked Questions (FAQ)
Q1: Can the SCH-1500 be used for 1500W fiber lasers?
A: Yes, it is specifically designed as an “All-in-One” solution for 1500W fiber laser systems, providing stable cooling for both the laser and the optics.
Q2: Where can I find more technical support?
A: You can visit our official portal at Chiller Industrial or consult the international refrigeration standards for guidance.
